CD25 Freshwater hose configuration

Micahbigsur@msn.com · Posted: Fri Aug 23, 2019 8:54 pm Post subject:

I got tired of the hassle of trying to pull stuff through behind and under the head so now I have left in permanent pull though lines. The tug was an all molded interior and was hard to add on to without cutting access hatches everywhere.

thataway · Posted: Fri Aug 23, 2019 10:05 pm Post subject:

When ever I have to pull a wire or hose, I always leave behind a pull thru line. There was already a pull thru line from under the galley, below the shower pan, and into the step area where there is a bilge pump. However, that was so tangled it was worthless pulling a pulling the 10 gauge triplex 110 V wire for the new water heater. It was easy to push a steel fishing tape, under the head, and then pull the wire behind the steel tape. A second pulling wire was left in place.

I also label all of the hoses with colored Zip ties: Blue for cold, and red for hot. These labels (along with written labels) were placed anywhere a hose or wire set went thru a bulkhead--on both sides if possible.