View previous topic :: View next topic |
Author |
Message |
CC Rider
Joined: 19 Nov 2013 Posts: 157 City/Region: Tsawwassen
State or Province: BC
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: CC Rider
Photos: CC Rider
|
Posted: Fri Jun 07, 2019 3:01 pm Post subject: |
|
|
Thanks! The Swee Pea one was the pic I was trying to find, but now after seeing the Dr. Bob bracket, I am re-thinking to copy his idea ....
Thanks again!
Chris _________________ MMSI#: 316033635 |
|
Back to top |
|
|
CC Rider
Joined: 19 Nov 2013 Posts: 157 City/Region: Tsawwassen
State or Province: BC
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: CC Rider
Photos: CC Rider
|
Posted: Fri Jun 07, 2019 3:37 pm Post subject: |
|
|
What is the V-shaped wedge bracket in Dr. Bob's pic? I can't seem to find one like it online....
Chris |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20815 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Fri Jun 07, 2019 5:49 pm Post subject: |
|
|
Here is the mock up of the bracket,. It was made in SS and cost about $100 at the local welder:
This is the plate in the fishing rod holder package:
In the smaller boats I have been just deck mounting the davit. On the 25, I had the lower section of the davit made 12" longer to give more clearance: _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
CC Rider
Joined: 19 Nov 2013 Posts: 157 City/Region: Tsawwassen
State or Province: BC
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: CC Rider
Photos: CC Rider
|
Posted: Fri Jun 07, 2019 7:14 pm Post subject: |
|
|
Thanks Bob, it was the plate that I couldn't find.... it seems only Sea Dog makes something like this now.
I will see if a fab shop can make a slide-in plate and a bracket to fit the lower davit mounting ball. I sure like the idea of being able to remove the mounting ball when not being used.
Chris |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20815 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Fri Jun 07, 2019 10:48 pm Post subject: |
|
|
Although a good machine shop can make the mounting plate (and perhaps a stronger one?). Sea Dog sells the plate only in the past. |
|
Back to top |
|
|
|