View previous topic :: View next topic |
Author |
Message |
Lawrence
Joined: 21 Jan 2005 Posts: 9 City/Region: santa rosa ca.
C-Dory Model: 22 Cruiser
Vessel Name: Squidward
|
Posted: Wed Sep 21, 2005 10:06 pm Post subject: INSIDE OVERHEAD HAND RAILS |
|
|
ARE INSIDE OVERHEAD GRAB RAILS A GOOD IDEA OR A HEAD BUTTOR
I CAN SEE THE ADVANTAGE IN ROUGH SEAS. BUT ARE THEY WORTH THE EXPENSE?
LARRY OF SQUIDWARD
THANKS FOR ALL THE INFORMATIVE INFORMATION IT REALLY HELPS TO HAVE MANY BRAINYACKS WORKING FOR YOU  |
|
Back to top |
|
 |
Island Ranger
Joined: 02 Jul 2004 Posts: 326 City/Region: Whidbey Island
State or Province: WA
C-Dory Year: 2007
C-Dory Model: R-25 Tug
Vessel Name: Island Ranger
Photos: Two Lucky Fish and Island Ranger
|
Posted: Wed Sep 21, 2005 10:26 pm Post subject: Don't Need 'em |
|
|
Don't have 'em, and don't think I need 'em. All depends on whether you plan to spend a lot of time cruising underway...... We don't - forward facing seat is sufficient for us
mac |
|
Back to top |
|
 |
Alyssa Jean
Joined: 02 Nov 2003 Posts: 2376 City/Region: Guemes Is.(Anacortes)
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 16 Angler
Vessel Name: Alyssa Jean
Photos: Anna Leigh and Alyssa Jean
|
Posted: Wed Sep 21, 2005 11:30 pm Post subject: |
|
|
If I am by myself in seas that are that bad, I have a deathgrip on the helm.
I installed a sissy bar in front of the port seat for Kate or her replacement.
Sit down and hang on is far better that stand up and hang, as far as I am concerned. If it's that bad, nobody shoudld be up and about. _________________ David and Kate
Alyssa Jean 16 Angler
Anna Leigh 22 Cruiser Sold 2005
Anna Leigh 25 Cruiser Sold 2014
K7KJR C-Brats #51 |
|
Back to top |
|
 |
Bob Cat
Joined: 28 Dec 2004 Posts: 262 City/Region: Santa Monica
State or Province: CA
C-Dory Year: 2006
C-Dory Model: 255 Tomcat
Vessel Name: Dive Cat
Photos: Dive Cat
|
Posted: Wed Sep 21, 2005 11:44 pm Post subject: |
|
|
Three points of physical contact is always good, no matter who or where you are.
Scaley |
|
Back to top |
|
 |
Pat Anderson
Joined: 02 Nov 2003 Posts: 8556 City/Region: Birch Bay, WA
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 25 Cruiser
Vessel Name: Daydream
Photos: Daydream and Crabby Lou
|
Posted: Wed Sep 21, 2005 11:53 pm Post subject: Re: INSIDE OVERHEAD HAND RAILS |
|
|
We had them on our 22, Brooks Fabricating - would not want to have been out in rough water without them, they were great. Have not decided whether to put them in the 25 or not, would like them but the ceiling is so dang high, Patty would have a difficult time reaching them (she can barely climb up to the dinette seats as it is...)
Lawrence wrote: | ARE INSIDE OVERHEAD GRAB RAILS A GOOD IDEA OR A HEAD BUTTOR
I CAN SEE THE ADVANTAGE IN ROUGH SEAS. BUT ARE THEY WORTH THE EXPENSE?
LARRY OF SQUIDWARD
THANKS FOR ALL THE INFORMATIVE INFORMATION IT REALLY HELPS TO HAVE MANY BRAINYACKS WORKING FOR YOU  |
_________________
DAYDREAM - CD25 Cruiser
CRABBY LOU - CD16 Angler (sold 2020)
Pat & Patty Anderson, C-Brat #62!
http://daydreamsloop.blogspot.com
|
|
Back to top |
|
 |
DaveS
Joined: 01 Nov 2003 Posts: 3204 City/Region: Arlington
State or Province: WA
C-Dory Year: 2004
C-Dory Model: 22 Cruiser
Vessel Name: Sea Shift
Photos: Sea Shift
|
Posted: Thu Sep 22, 2005 12:38 am Post subject: |
|
|
I wouldn't be without them either....fully agree with the 3 points of contact. Don't know about you, but with two crew members on board most of the time now, they never same to stay in one location for any length of time and are always moving around...(good reason for trim tabs)...besides if my 'ol memory serves me right someone on the "site" fractured or sprained his ankle when he used the table for support in rough seas and it didn't "support" him. _________________ Dave S.
"Sea Shift"
C-Brat #16 |
|
Back to top |
|
 |
TyBoo
Joined: 23 Oct 2003 Posts: 5328 City/Region: Warrenton
State or Province: OR
C-Dory Year: 1996
C-Dory Model: 25 Cruise Ship
Vessel Name: TyBoo
Photos: TyBoo
|
Posted: Thu Sep 22, 2005 3:26 am Post subject: |
|
|
Mac, who sits at the helm and makes motor noises, wrote: | All depends on whether you plan to spend a lot of time cruising underway...... We don't - |
Most people, however, are definitely underway when cruising.
David, who is in big trouble, wrote: | ...for Kate or her replacement. |
Perhaps a rephrasing is in order??
Sorry, I don't have anything to add to this discussion. But I sure got a kick out of reading it! _________________ TyBoo Mike
Sold: 1996 25' Cruise Ship
Sold: 1987 22' Cruiser |
|
Back to top |
|
 |
Little Catelyn
Joined: 23 Feb 2005 Posts: 115 City/Region: Anacortes
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Little Catelyn
Photos: Little Catelyn
|
Posted: Thu Sep 22, 2005 4:10 am Post subject: |
|
|
Hey, I've got them inside rails, and the only thing I keep hitting my head on is the top of the doorjamb while exiting the cabin.
No, all seriousness aside, I'm over 6'-1" and have no problem with the inside rails. I do recommend that you mount a shorter rail to starboard that is over the galley but NOT the helm -- I hit my head once on the roof and was real glad there wasn't a handrail directly above the helm.
Corwin |
|
Back to top |
|
 |
journey on
Joined: 03 Mar 2005 Posts: 3598 City/Region: Valley Centre
State or Province: CA
C-Dory Year: 2005
C-Dory Model: 25 Cruiser
Vessel Name: journey on
Photos: Journey On
|
Posted: Thu Sep 22, 2005 10:04 am Post subject: |
|
|
I'm surprised there is even any discussion. We had them on the sailboat, used them automatically, and we sure got them on the 25. Hanging on in rough seas is fine, but we even used them for being at anchor when some jerk comes through or theres a good swell. Judy had a handhold installed for the port seat, on the bulkhead. That also works great.
You can't have too many handholds on a boat (especially one going 20 knts.) I want one on the front of the cabin so I can hold on going from the side to the bow, when we're at anchor.
Boris |
|
Back to top |
|
 |
Not For Hire
Joined: 20 May 2004 Posts: 347 City/Region: Cadillac, MI
State or Province: MI
C-Dory Year: 2004
C-Dory Model: 22 Cruiser
Vessel Name: Not For Hire
Photos: Not For Hire
|
Posted: Thu Sep 22, 2005 10:27 am Post subject: |
|
|
I used rope instead of stainless for my handholds. I was going to replace the finish washers holding down the outside guide rails with fender washers anyway and so I also replaced the bolts with stainless screw eyes. Then I ran 5/8 inch line through the eyes. Very taut on warm days, slightly looser on cooler days due to cabin expansion/contraction. I sometimes fish when it is pretty rough and need to get to the downriggers, etc. Also it works great to haul myself out of the dinette bunk in the pre-coffee morning (altho I usually sleep in v-berth). I think the factory interior stainless rails might look nicer. But this is very workable and has moved the interior rails way down the list of my priorities. Aside from the occasional joke about it looking like a theatre lobby -- no problemo. I think there is a bad picture or two in my album. _________________ Mark S
Cadillac, Michigan |
|
Back to top |
|
 |
Chuckpacific
Joined: 03 Nov 2003 Posts: 397 City/Region: SW PDX
State or Province: OR
Vessel Name: Big Sky
Photos: Big Sky
|
Posted: Thu Sep 22, 2005 11:05 am Post subject: |
|
|
I use a 'walker' for stability inside. Raising my arms to grab something on the ceiling raises the boat's center of gravity and adds to roll. The walker is also useful when on the front deck raising the anchor and I used it for support once pull starting the engine when my battery was dead. |
|
Back to top |
|
 |
lloyds
Joined: 02 Aug 2005 Posts: 1724 City/Region: sublimity
State or Province: OR
C-Dory Year: 1996
C-Dory Model: 22 Cruiser
Vessel Name: undecided
Photos: 1996 22 Cruiser (Lloyds)
|
Posted: Thu Sep 22, 2005 11:30 am Post subject: |
|
|
I personally feel they should be nearly a standard item. There are a lot of times when you do have more than one crewmember and they need something to hang on to, even in the smooth periods. Virtually all sailboats have them, I had them on all my sailboats, and they were in use almost constantly. |
|
Back to top |
|
 |
Redƒox Guest
|
Posted: Thu Sep 22, 2005 2:42 pm Post subject: |
|
|
~~~would not be without them mon!!
check it out....
http://www.c-brats.com/albums/RedFox/cabinshot1.jpg
never-mind me and my company in the pic though. The rails were the original teak ones on the outside of cabin.  |
|
Back to top |
|
 |
|