View previous topic :: View next topic |
Author |
Message |
flapbreaker
Joined: 26 Jan 2005 Posts: 878 City/Region: Hillsboro
State or Province: OR
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Playin' Hooky
Photos: Playin' Hooky
|
Posted: Thu Sep 15, 2005 11:13 pm Post subject: Overall length of c-dory and trailer? |
|
|
Just wondering what the overall length of a 22' cruiser with motors and trailer? I'm guessing 30'? |
|
Back to top |
|
 |
Luna C
Joined: 25 Feb 2004 Posts: 404 City/Region: Lake Goodwin/Center Island
State or Province: WA
C-Dory Year: 2019
C-Dory Model: 255 Tomcat
Vessel Name: Panthera
Photos: Luna C
|
Posted: Fri Sep 16, 2005 12:27 am Post subject: |
|
|
Alot more than 22 feet! I am building a C shed. From prop to tounge is about 28 ft. That makes for a 30 foot building! It will be a fun project. _________________ Janet & Chris without CD22 Luna C
Now with Panthera 255 TC |
|
Back to top |
|
 |
Da Nag
Joined: 24 Oct 2003 Posts: 2832 City/Region: Port Angeles
State or Province: WA
C-Dory Year: 1995
C-Dory Model: 25 Cruise Ship
Vessel Name: Wilbur
Photos: Da Boats
|
Posted: Fri Sep 16, 2005 1:03 am Post subject: Re: Overall length of c-dory and trailer? |
|
|
flapbreaker wrote: | Just wondering what the overall length of a 22' cruiser with motors and trailer? I'm guessing 30'? |
That's a good conservative number to go with. There will be a little variation with trailers and motors, and you can save almost 2 feet by lowering the outboard. Also, if space is really at a premium, you can get a swing tongue on many trailers.
With a single Honda 90 in the raised position, on a tandem Pacific trailer, I'm right around 29' from end to end. _________________
Will, C-Brat Nerd  |
|
Back to top |
|
 |
flapbreaker
Joined: 26 Jan 2005 Posts: 878 City/Region: Hillsboro
State or Province: OR
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Vessel Name: Playin' Hooky
Photos: Playin' Hooky
|
Posted: Fri Sep 16, 2005 8:59 am Post subject: |
|
|
Thanks guys. |
|
Back to top |
|
 |
Luna C
Joined: 25 Feb 2004 Posts: 404 City/Region: Lake Goodwin/Center Island
State or Province: WA
C-Dory Year: 2019
C-Dory Model: 255 Tomcat
Vessel Name: Panthera
Photos: Luna C
|
Posted: Sat Sep 17, 2005 12:15 am Post subject: |
|
|
Mine was with the 90 Suzuki in the down position and a King dual axle trailer. |
|
Back to top |
|
 |
Sneaks
Joined: 06 Jun 2004 Posts: 2020 City/Region: San Diego (Encinitas)
State or Province: CA
C-Dory Year: 1993
C-Dory Model: 16 Angler
Vessel Name: C-Brat
Photos: Jenny B and C-Brat
|
Posted: Sat Sep 17, 2005 9:38 am Post subject: |
|
|
My C-22 with a 75F Yamaha engine had to fit in a 26 ft. long space. I ordered a Pacific tandem trailer with the swing tongue and with the tongue out of the way, it will fit the space with about 6-8" to spare if the engine is up. I always back over the curb, then lower the engine and back in to the "mark" on the driveway where the front tire should sit because forgetting to follow procedure would easily result in an unwanted vent hole in the garage wall if I'm not very careful.
Don _________________ Mary & Don Anderson
Brat #483
"Jenny B" 2005 C-22/F75 sold, Oct. 2008
"C-Brat" 1993 C-16 angler/50 hp |
|
Back to top |
|
 |
ffheap
Joined: 02 Nov 2003 Posts: 733 City/Region: Hingham
State or Province: MA
C-Dory Year: 1983
C-Dory Model: 22 Angler
Vessel Name: Inn-The-Water
Photos: Inn-The-Water
|
Posted: Sun Oct 09, 2005 7:05 pm Post subject: |
|
|
According to the Nantucket Steamship Company, with engine up, the length is 26'
Fred _________________ Fred |
|
Back to top |
|
 |
|