The C-Brats Forum Index
HomeForumsMy TopicsCalendarEvent SignupsMemberlistOur C-DorysThe Brat MapPhotos

Venture Sink Size

 
Post new topic   Reply to topic    The C-Brats Forum Index -> The Galley
View previous topic :: View next topic  
Author Message
RobMcClain



Joined: 21 May 2012
Posts: 355
City/Region: Summerlin, NV
State or Province: NV
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: Freedom
Photos: Freedom
PostPosted: Mon Jun 23, 2014 2:10 pm    Post subject: Venture Sink Size Reply with quote

I am looking for the outside rim measurements (length & width) of the galley sink installed on a Venture 23. I want to build a new cutting board for over our sink and measured it before leaving the boat on the East Coast, but then I left the measurements onboard. Duh.... Anyone have their Venture handy and easily able to provide these measurements? I know the Venture sink is bigger than the one installed on a C22. While our boat was built in 2006 by Cape Cruiser, I suspect the newer C-Dory model is the same or very close.

Rob Rolling Eyes
Back to top
View user's profile Send private message Send e-mail
NORO LIM



Joined: 24 Apr 2008
Posts: 875
City/Region: Olympia
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: NORO LIM (sold 12/12/14)
Photos: NORO LIM
PostPosted: Mon Jun 23, 2014 2:13 pm    Post subject: Reply with quote

Rob,

I have a 2006 CC Venture, as well. I'll be heading out to the boat this afternoon, and will take the measurements. I'll post if no one else beats me to it.

_________________
Bill, Formerly on NORO LIM
2001 CD 16, 2001-2006
2006 CC 23, 2006-2014
Back to top
View user's profile Send private message
Will-C



Joined: 21 Aug 2007
Posts: 2476
City/Region: Temple
State or Province: PA
C-Dory Year: 2008
C-Dory Model: 23 Venture
Vessel Name: Will-C
Photos: Will-C
PostPosted: Mon Jun 23, 2014 2:16 pm    Post subject: Venture Sink Size Reply with quote

I don't know if the Cape Cruisers and Ventures used the same size sink but I can measure mine when I get home about 5:30 pm est.
D.D.

_________________
Chevrolet The Heart Beat Of America
Back to top
View user's profile Send private message Send e-mail
Casey



Joined: 02 Nov 2003
Posts: 1094
City/Region: The Villages(FL)
State or Province: FL
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: "Dessert 1st"
Photos: Dessert 1st
PostPosted: Mon Jun 23, 2014 2:25 pm    Post subject: Reply with quote

Rob,

Sorry, I don't have the measurements handy, and we're out of the country for a while.

When I made a cutting board for our sink I made it slightly shorter than the sink which allows the cutting board to be used but still permits the faucet to drain into the sink.

...and, cut the underside of the cutting board so it fit's inside edge of the sink so it doesn't slide around when underway.

Best,
Casey&Mary

_________________
2013 CC23 "Katmai" renamed "Dessert 1st"
2006 CC23 "Katmai" (purchased August 2009)
2003 CD22 "Naknek" (sold May 2008)
Back to top
View user's profile Send private message
colobear



Joined: 23 Jan 2005
Posts: 2154
City/Region: Denver
State or Province: CO
C-Dory Year: 2006
C-Dory Model: 22 Cruiser
Photos: C-Cakes
PostPosted: Mon Jun 23, 2014 2:33 pm    Post subject: Reply with quote

I made our cutting board out of a standard HDPF? cutting board, trimmed it with a band saw, and adhered 4 cleats made from the scraps to the underside so that it will not slide off. has worked fine for years.
_________________
Patti and Barry
formerly C-Cakes, now
rving around N. America
Back to top
View user's profile Send private message Send e-mail
Will-C



Joined: 21 Aug 2007
Posts: 2476
City/Region: Temple
State or Province: PA
C-Dory Year: 2008
C-Dory Model: 23 Venture
Vessel Name: Will-C
Photos: Will-C
PostPosted: Mon Jun 23, 2014 3:47 pm    Post subject: Venture Sink Size Reply with quote



Ours measures 13" x 17" outside to outside and 10" x 14" on the inside to inside
I just attached two wood strips underneath long ways cut to length so the board stays put while underway. My wife did the measuring I take no responsibility for errors. Mr. Green
D.D.
Back to top
View user's profile Send private message Send e-mail
Will-C



Joined: 21 Aug 2007
Posts: 2476
City/Region: Temple
State or Province: PA
C-Dory Year: 2008
C-Dory Model: 23 Venture
Vessel Name: Will-C
Photos: Will-C
PostPosted: Mon Jun 23, 2014 3:56 pm    Post subject: Venture Sink Size Reply with quote

17 x 13-3/4 is what I cut our cutting board to as the faucet comes close to the rear edge of the sink.
D.D.
Back to top
View user's profile Send private message Send e-mail
NORO LIM



Joined: 24 Apr 2008
Posts: 875
City/Region: Olympia
State or Province: WA
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: NORO LIM (sold 12/12/14)
Photos: NORO LIM
PostPosted: Mon Jun 23, 2014 6:48 pm    Post subject: Reply with quote

Well, looks like you've got plenty of information, but for what it's worth:

Outside dimensions: 16 7/8 L X 12 7/8 W

Inside dimensions: 13 7/8 L X 9 7/8 W (approximations due to curved edges and slightly angled sides)

Good luck on the project.
Back to top
View user's profile Send private message
RobMcClain



Joined: 21 May 2012
Posts: 355
City/Region: Summerlin, NV
State or Province: NV
C-Dory Year: 2006
C-Dory Model: 23 Venture
Vessel Name: Freedom
Photos: Freedom
PostPosted: Mon Jun 23, 2014 10:30 pm    Post subject: Reply with quote

You guys are great!! Thanks so much for the info provided. It is exactly what I needed.

Rob
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    The C-Brats Forum Index -> The Galley All times are GMT - 5 Hours
Page 1 of 1

 
     Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum



Page generation time: 0.0364s (PHP: 64% - SQL: 36%) - SQL queries: 27 - GZIP disabled - Debug on