View previous topic :: View next topic |
Author |
Message |
Les Lampman Dealer
Joined: 30 Oct 2003 Posts: 779 City/Region: Whidbey Island
State or Province: WA
|
Posted: Sat Aug 20, 2011 4:49 pm Post subject: Size matters... |
|
|
Larger cleats are a good thing!
Here are a couple of photos showing the difference between a standard 8" cleat and the heavy duty 8" cleat we're using on the Marinaut:
_________________ Les
www.marinautboats.com |
|
Back to top |
|
|
hardee
Joined: 30 Oct 2006 Posts: 12632 City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
Posted: Wed Aug 24, 2011 4:52 pm Post subject: |
|
|
Les,
Thanks for posting that. Is the hole pattern the same, IE, would the HD cleat you are using be a standard, "switch the bolt" replacement for what is on my cruiser, or I guess, the light duty one in the picture?
I need to take my cleats off, re-bed and back them, and it would sure make sense to do the switch at the same time. IMHO.
Thanks for your reply.
Harvey
SleepyC _________________ Though in our sleep we are not conscious of our activity or surroundings, we should not, in our wakefulness, be unconscious of our sleep. |
|
Back to top |
|
|
Les Lampman Dealer
Joined: 30 Oct 2003 Posts: 779 City/Region: Whidbey Island
State or Province: WA
|
Posted: Wed Aug 24, 2011 4:56 pm Post subject: |
|
|
hardee wrote: | Les,
Thanks for posting that. Is the hole pattern the same, IE, would the HD cleat you are using be a standard, "switch the bolt" replacement for what is on my cruiser, or I guess, the light duty one in the picture?
I need to take my cleats off, re-bed and back them, and it would sure make sense to do the switch at the same time. IMHO.
Thanks for your reply.
Harvey
SleepyC |
Hi Harvey,
The bases on the cleats I have are different; the heavy duty model's base is wider and further apart.
Les |
|
Back to top |
|
|
starcrafttom
Joined: 07 Nov 2003 Posts: 7881 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Thu Aug 25, 2011 12:34 pm Post subject: |
|
|
I would want to know if the smaller cleats are adequate or not. I mean just what are you going to do with these cleats? I use mine to tie up the boat and hang fenders from them. Do I really need something that I can hang the boat from? can I hang the boat from the smaller cleats? the biggest load that I have placed on my cleats was towing a larger boat with the aft cleats on my 22, what size where they? What ever size they were did a great job and never showed any sign of ware or stress. some times bigger is better but just not needed. _________________ Thomas J Elliott
http://tomsfishinggear.blogspot.com/ |
|
Back to top |
|
|
Jack in Alaska
Joined: 17 Aug 2004 Posts: 1190 City/Region: Anchorage/Ninilchik
State or Province: AK
C-Dory Year: 2005
C-Dory Model: 26 Pro Angler
Vessel Name: HIGH TIDE II
Photos: HIGH TIDE II
|
Posted: Thu Aug 25, 2011 1:48 pm Post subject: Cleats |
|
|
My present CD came with a really small, whussey looking bow cleat which was poorly bedded and not backed. It did not look to be sufficient enough to hang a bumper on let alone securing the anchor line to.
I replaced it with a 10" galvanized heavy duty cleat. It is properly bedded and backed and works well. I pull my anchor with a buoy so there is considerable strain placed on it.
Starcraftbottom........go with reasonably the best available as you never know how or when something will be used to it's max or more in an emergency.
Doesn't your CD have tow eyes on the transom???? _________________ On the HIGH TIDE-II, wife Carolyn and I.....Another summer fishing on the HIGH TIDE II in the Cook Inlet at Cape Ninilchik, Alaska.
HIGH TIDE-II; 2005 26' ProAngler; 2003 200 Honda / 2009 9.9 Honda high thrust
No. CD026021I405; AK-5008-AK
MSSI No. 338143486(cancelled)
HIGH TIDE; 1983 Angler Classic 22'; 90 Honda/ 9.9 Tohatsu-sold 2009 to son Dan (flatfishfool)
Stolen & stripped in Aug. 18
Bare hull & trailer sold in Nov. |
|
Back to top |
|
|
starcrafttom
Joined: 07 Nov 2003 Posts: 7881 City/Region: marysville
State or Province: WA
C-Dory Year: 1984
C-Dory Model: 27 Cruiser
Vessel Name: to be decided later
Photos: Susan E
|
Posted: Thu Aug 25, 2011 2:43 pm Post subject: |
|
|
I don't think that the 22 did have eyes but I dont remember. I will have to drive by its current owners homes. He lives near by so its easy. |
|
Back to top |
|
|
thataway
Joined: 02 Nov 2003 Posts: 20810 City/Region: Pensacola
State or Province: FL
C-Dory Year: 2007
C-Dory Model: 25 Cruiser
Vessel Name: thataway
Photos: Thataway
|
Posted: Thu Aug 25, 2011 3:59 pm Post subject: |
|
|
Backing plates are very important--at least fender washers under the cleat. With enough force cleats can break, but it is more likely to pull out of the boat. In the larger boats we would put a 3/8" plate of Aluminum under the forward cleats, and windlass bolts, so that they were all tied together. Bed the aluminum in epoxy--and it is going to be very strong. _________________ Bob Austin
Thataway
Thataway (Ex Seaweed) 2007 25 C Dory May 2018 to Oct. 2021
Thisaway 2006 22' CDory November 2011 to May 2018
Caracal 18 140 Suzuki 2007 to present
Thataway TomCat 255 150 Suzukis June 2006 thru August 2011
C Pelican; 1992, 22 Cruiser, 2002 thru 2006
Frequent Sea; 2003 C D 25, 2007 thru 2009
KA6PKB
Home port: Pensacola FL |
|
Back to top |
|
|
Les Lampman Dealer
Joined: 30 Oct 2003 Posts: 779 City/Region: Whidbey Island
State or Province: WA
|
Posted: Fri Aug 26, 2011 11:17 pm Post subject: |
|
|
starcrafttom wrote: | I would want to know if the smaller cleats are adequate or not. I mean just what are you going to do with these cleats? I use mine to tie up the boat and hang fenders from them. Do I really need something that I can hang the boat from? can I hang the boat from the smaller cleats? the biggest load that I have placed on my cleats was towing a larger boat with the aft cleats on my 22, what size where they? What ever size they were did a great job and never showed any sign of ware or stress. some times bigger is better but just not needed. |
Tom,
I'm sure the smaller cleats are adequate in almost all situations that folks will use them in. The larger cleats (they're the same 8" length just beefier) look better on the boat and since they have a larger opening (between the vertical legs) it's easier to get a line and a fender on. They also accommodate a 1/2" line better; I use that too rather than the (for me) too small 3/8" stuff.
So in this case I say they're better because they look better and are easier to use. I doubt seriously if you'd ever break the standard model, much less the heavy duty ones.
Les |
|
Back to top |
|
|
Jack in Alaska
Joined: 17 Aug 2004 Posts: 1190 City/Region: Anchorage/Ninilchik
State or Province: AK
C-Dory Year: 2005
C-Dory Model: 26 Pro Angler
Vessel Name: HIGH TIDE II
Photos: HIGH TIDE II
|
Posted: Fri Aug 26, 2011 11:51 pm Post subject: |
|
|
Les,
Making it big and looking good is called making it "oilfield" where I worked.
If you can't put a line on it and lift the boat out of the water it is a POS and not oilfield.
Jack |
|
Back to top |
|
|
Les Lampman Dealer
Joined: 30 Oct 2003 Posts: 779 City/Region: Whidbey Island
State or Province: WA
|
Posted: Sat Aug 27, 2011 12:09 am Post subject: |
|
|
Jack in Alaska wrote: | Les,
Making it big and looking good is called making it "oilfield" where I worked.
If you can't put a line on it and lift the boat out of the water it is a POS and not oilfield.
Jack |
Oilfield it is then!
Les |
|
Back to top |
|
|
hardee
Joined: 30 Oct 2006 Posts: 12632 City/Region: Sequim
State or Province: WA
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Sleepy-C
Photos: SleepyC
|
Posted: Sat Aug 27, 2011 11:35 am Post subject: |
|
|
Tom,
My Dad taught me to never bet unless it is a sure thing, so here goes.
I am betting you one nights stay at the SBS CBGT that your 22 had tow rings, or otherwise known as tie-down loops on it. You just can't see them from inside the cockpit.
and Les:
Go "oilfield". I'd like them on my boat too, for the same reasons you mentioned. That way nobody has to ask, "Where's the beef?" Guess that has to do with my penchant for belt and suspenders, dual purpose, and redundancy and over kill and such.
Harvey
SleepyC
|
|
Back to top |
|
|
|