Anchor light replacement cap

[letitride]

Hi All,

Hoping some one can point me in the right direction, need to find a replacement anchor light cap the one that mounts on the electronic control panel see below picture - (1995 22ft Cruiser Model):


upper right side of the panel has the words"Anchor Light Cap store here when not in use" - I need one of these caps?


Thanks,
Paul

[Rob & Karen]

The anchor lights are made by Perko. There is a link to the Perko catalog in the thread below. An easier fix may be to use one of the plastic caps that comes on a 1lb propane bottle. I haven't actually tried it, but somewhere I read that it fits perfectly.

Hope this helps.

Rob

http://www.c-brats.com/viewtopic.php?t=10569&highlight=perko

[localboy]

I don't know if they sell JUST the cap, but it's a Perko unit so perhaps you could ask your local Perko dealer.

http://www.fisheriessupply.com/online/ln_menu/product.asp/Ntt/perko+anchor+light/product_id/13156/No/30/N/4294813683/Ne/6/catalog_name/FISCO/R/2442/act/A01/mode/1/Ntx/mode+matchpartial+rel+Inactive/Ntk/All

[letitride]

Thank you Rob and Mark,

I will check with my local Perko dealer and let you all know what I find


thanks,
paul

[amy and karl]

Maybe this will help.http://www.iboats.com/Perko_Replacement_Base_Cap/dm/view_id.134217

Good luck,

karl

[lloyds]

I'm still using the propane bottle cap. It has been up there for about the last six months and several thousand highway miles and just keeps holding on. Plus, if I need a replacement I just walk out in the garage and grab one.

[B~C]

the nice thing about the disposable propane bottle cap...there is no way you can crossthread it.