Ranger 25 demo schedule and performance data

Turner Marine

Hi all,

We have a Ranger 25 in the water available to demo for anyone who wants a truly enjoyable experience.

I checked our boat (cummins 150 hp diesel) performance against the published specs on the www.rangertugs.com site and found that they are indeed accurate.

22 knots top end is very impressive and the boat performance in a sizable chop and beam seaway is top notch for this size vessel......much more comfortable than one would assume.

best regards,

keith turner
www.turnermarine.com

Doryman · Posted: Thu May 01, 2008 2:07 pm Post subject:

Just curious -- what are the gph figures for various speeds?

Warren

terraplane · Posted: Thu May 01, 2008 4:00 pm Post subject: ranger 25

.....and would it be possible to give figures for the Yanmar 110 also?

Turner Marine · Posted: Thu May 01, 2008 9:30 pm Post subject: gph for speed

hi,

The new cummins engines come with an lcd display which computes gph for each speed setting, tankage, fuel range, etc. However, since we just launched her yesterday, we have not calibrated the unit and would be wary of announcing any numbers until we have.

i will post that data asap. With the yanmar engines, it will have to be done the old fashioned way by dividing gallons burned into miles traveled between fuel docks......although there are after market fuel flow gauges that may be installed on any vessel.

keith turner
www.turnermarine.com

Wefings · Posted: Fri May 02, 2008 9:16 am Post subject:

Remember , results may vary ! The performance of any diesel motor will be affected by heat , water temp, salinity and humidity and loading . I have requested that information be added to this Cummins sponsored performance report .If any one has specific questions regarding Yanmar performance , we have extensive experience with the Yanmar powered Ranger Tugs and will be happy to answer any inquiries to the best of our abilities .
Marc

Cummins 130 hp Specs.
RPM FUEL USE SPEED
700 (Idle) .2 GPH 3.1 Knots
1500 .9 GPH 5.4 Knots
2000 1.5 GPH 7.0 Knots
2500 2.3 GPH 8.7 Knots
3000 3.8 GPH 12.3 Knots
3200 4.1 GPH 13.0 Knots
3500 5.3 GPH 15.7 Knots
4060 (Max) 7.4 GPH 20.5 Knots
Propeller (17x14) (3 blade) (.105 cup) Acme #1386
Cummins 150 HP Specs.
RPM FUEL USE SPEED
700 (Idle) .3 GPH 3.5 Knots
1500 1.0 GPH 6.4 Knots
2000 2.0 GPH 7.7 Knots
2500 3.1 GPH 11.5 Knots
2800 3.8 GPH 13.3 Knots
3000 4.7 GPH 15.5 Knots
3400 6.2 GPH 17.6 Knots
4060 (Max) 8.6 GPH 22.1 Knots
Propeller (17x15) (3 blade) (.105 cup) Acme #1384
Fluid Motion LLC 25802 Pacific Highway South Kent, Washington 98032
Phone 253-839-5213 Fax 253-839-5218 www.rangertugs.com
All of our boats are sea trialed prior to shipping to our dealers and customers.
This data was gathered during one of these sea trials.
Performance can vary depending on sea conditions, weight (load) and weather.
This data is to be used only as a guide.
Ranger Tugs R-25 — Performance Data