View previous topic :: View next topic |
Author |
Message |
416rigby
Joined: 31 Mar 2004 Posts: 1208 City/Region: Port Angeles
State or Province: WA
C-Dory Year: 2001
C-Dory Model: 22 Cruiser
Vessel Name: Foggy Dew
Photos: Foggy Dew
|
Posted: Sun Jan 04, 2009 11:49 pm Post subject: Radar arch light mount |
|
|
I'd like to relocate the all-around light to the radar arch. Can't seem to find a fold down mount that comes off the rear of the arch like I see some folks have. Any ideas where I can find one? Our arch didn't come with one.
My only alternative would be to fab a plate to sandwich between the radar antenna and the mounting plate to extend back and mount the existing socket/pole to it.
Any ideas?
Thanks
Rick _________________ "Life's too short to hunt with an ugly gun"
At last...home for good in the Great Northwest!
2001 22 Cruiser "Foggy Dew" 2006-2013 |
|
Back to top |
|
 |
Wandering Sagebrush
Joined: 21 Jan 2005 Posts: 2784 City/Region: Northeast Oregon
State or Province: OR
C-Dory Year: 2005
C-Dory Model: 22 Cruiser
Vessel Name: Constant Craving
Photos: Constant Craving
|
Posted: Mon Jan 05, 2009 12:29 am Post subject: Perko |
|
|
Rick,
I just bought a second Perko base for my anchor light. You need to get into a good catalog that carries a more complete selection than the WM catalog has. The folks at Sportcraft Marine here in Portland ordered it for me. Seems like it was around $25.
My arch did have a mount plate aft of the radome, so all I needed to do was install the light base and connect the wiring. I pulled the wires when I installed the arch. Probably the first time I've planned ahead.
Hope this helps.
Steve _________________ "And in the end, it's not the years in your life that count. It's the life in your years." - Abraham Lincoln |
|
Back to top |
|
 |
416rigby
Joined: 31 Mar 2004 Posts: 1208 City/Region: Port Angeles
State or Province: WA
C-Dory Year: 2001
C-Dory Model: 22 Cruiser
Vessel Name: Foggy Dew
Photos: Foggy Dew
|
Posted: Mon Jan 05, 2009 8:01 pm Post subject: |
|
|
Thanks, Steve. I was thinking that the plate idea is what I'm gonna go with. And the Sportcraft folks are great, I agree. Now, if only I had your forward thinking about running the wiring when I installed that arch...
Rick |
|
Back to top |
|
 |
Rob & Karen
Joined: 24 Nov 2006 Posts: 353 City/Region: Franklin
State or Province: TN
C-Dory Year: 2007
C-Dory Model: 22 Cruiser
Vessel Name: Life of Riley
Photos: Life of Riley
|
Posted: Mon Jan 05, 2009 9:28 pm Post subject: |
|
|
Rick,
I recently went through the Perko catalog online looking for an LED bulb replacement. I did not find it, but I was able to find my exact light during the process. Check the link below.
http://www.perko.com/frame_catalog.html
My light is a model 1209 and is shown on page 49. The replacement base is shown on page 69.
Hope this helps.
Rob |
|
Back to top |
|
 |
416rigby
Joined: 31 Mar 2004 Posts: 1208 City/Region: Port Angeles
State or Province: WA
C-Dory Year: 2001
C-Dory Model: 22 Cruiser
Vessel Name: Foggy Dew
Photos: Foggy Dew
|
Posted: Tue Jan 06, 2009 3:32 pm Post subject: |
|
|
Thanks...I'll look around and see what I can come up with.
Rick |
|
Back to top |
|
 |
|