(AnchortownJim) At anchor in Hummer Bay PWS, 7/24/04
Viewed: 1629 times.
|
(AnchortownJim) Alaska Series 220TDS Dinghy in Hummer Bay PWS, 7/24/04
Viewed: 1385 times.
|
Album: Blackstone BayChanged: 11/02/07
Contains: 14 items. Viewed: 1055 times.
|
(AnchortownJim) My other boat... Whittier Harbor, PWS, 7/31/04
Viewed: 1149 times.
|
(AnchortownJim) Another view of my other boat... Whittier Harbor, PWS, 7/31/04
Viewed: 1221 times.
|
(AnchortownJim) Silver Salmon time, Port Wells, PWS, 7/31/04
Viewed: 1130 times.
|
(AnchortownJim) Tow Rig
Viewed: 1662 times.
|
Album: Pigot BayChanged: 11/02/07
Contains: 6 items. Viewed: 1130 times.
|
|
Album: 2005 AdventuresChanged: 11/02/07
Contains: 12 items. Viewed: 1104 times.
|
Album: 2006 AdventuresChanged: 11/02/07
Contains: 34 items. Viewed: 1286 times.
|
Album: Winter StorageChanged: 02/20/08
Contains: 8 items. Viewed: 738 times.
|
Album: 2007 AdventuresChanged: 02/21/08
Contains: 5 items. Viewed: 735 times.
|
Album: Trim Master Actuator Leak RepairThe Trim Master trim tabs are easily repaired if the actuator seals start to leak. Removing the end cap is greatly facilitated by using the OTC Adjustable Gland Nut Wrench #7463 available at any NAPA autoparts store. I did not put a 1/2" socket wrench on the Gland Nut Wrench, hand force was all that was needed to remove the end cap. The U-Seal came from a local hydraulic shop and they were a great help figuring out the proper seal needed. I heated up the U-Seal with a heat gun, lubed it up with oil and it was fairly easy to stretch on the actuator piston. I was quite happy to figure this out as Trim Master Company went out of business a few years ago and we owners of their trim tabs are now on our own. Changed: 08/18/12
Contains: 8 items. Viewed: 679 times.
|