C-Swell did not have a table so I decided to add a Garelick stowable table. I added cherry wood molding made by my Dad to keep things from sliding off and to go with the other wood trim in the cabin.
Viewed: 1333 times.
|
I now have a place for two people to sit on the bench seat and eat inside out of the weather.
Viewed: 1095 times.
|
There is still room to work in the galley and pass fore and aft.
Viewed: 1029 times.
|
The table can be swung over the bench seat and be used to prepare meals and leave room for two people to pass by each other.
Viewed: 1047 times.
|
Another view of how the table is out of the way for fore and aft access when it is stowed over the bench seat.
Viewed: 940 times.
|
Table can be stowed high enough over bench seat to allow access to foot and bench seat lockers.
Viewed: 976 times.
|
Another shot of foot and bench seat locker access.
Viewed: 896 times.
|
Table can also be stowed in a vertical position allowing one person to sit on bench seat. Access to storage lockers is possible in this position also.
Viewed: 955 times.
|
Another shot of table stowed in vertical position allowing free fore and aft movement.
Viewed: 891 times.
|
Table can also be positioned between the helm and passenger seat.
Viewed: 905 times.
|
Table can also be turned in this position allowig some use from forward seats and bench seat at the same time. It is possible to crawl under it.
Viewed: 856 times.
|
The Garelick table has a Melamine table top, anodized pedestal, wall bracket and table bracket.
Viewed: 875 times.
|
I need to give credit to Richard (C Eagle) for giving me the idea for this table and a way to let it swivel on the third axis. I used a 12"x12"x1/8" sheet of 5052 aluminum and a 12"x12"x1/2" sheet of HDPE from (Small Parts, Inc.) along with stainless steel screws, bolts, nuts and washers to allow the table top to turn 360 degrees.
Viewed: 836 times.
|
One mre picture showing the table in the dining position and room to slip by it.
Viewed: 853 times.
|
I did not include a picture, but the table and pedestal can be removed and laid on the v-berth for complete out of the way day time storage.
Viewed: 894 times.
|
3" Serta memory foam cut to fit cushion cover with bread knife.
Viewed: 852 times.
|
Cushion cover sewn by Junction House in Dawson Springs, KY with 3" memory foam inside. Memory foam cushion is placed on top of factory foam cushion and makes a considerable difference in sleeping comfort.
Viewed: 764 times.
|
New C-Dory and boat name decals
Viewed: 738 times.
|
New C-Swell boat name decal
Viewed: 732 times.
|
New C-Dory decal from factory
Viewed: 766 times.
|
New Colorado registration decals
Viewed: 807 times.
|
Wallas stove is working fine, Aug. 2010
Viewed: 873 times.
|
Table is working out just fine also, Aug. 2010
Viewed: 812 times.
|
Level step from swim step to splash well into cock pit and stand for generator.
Viewed: 542 times.
|