The 10" Grab Rails added to the inside of Sea Angel's head as 'throne lifters'[or as my wife calls them- Head Handles]. Rails were purchased from the factory stock.
Viewed: 785 times.
|
Safety grab handles and Pantographic wiper arms added. Handles are easily reached from inside the cabin for fender applications.
Viewed: 696 times.
|
Safety grab handles and Pantographic wiper arms added
Viewed: 680 times.
|
(Sea Angel) Starboard Side Grab Rail &
Galley Fire Extinguisher. The two Interior Grab Rails were purchased from "THE RAILMAKEWRS NORTHWEST" in Everett, WA.
Viewed: 832 times.
|
(Sea Angel) Port Side Grab Rail, Fire Extinguisher and WX Station.
The WX Station is mounted on a hinged base so the clock battery can be changed. Two brass eyes are positioned in the side section with a brass 'pin' made from a toilet support arm, bent and cut to length with short line attached. The 'Sea Angel' name is mounted with a "Clear Mailing Label" designed for a laser printer and covered acrlyic spray.
Viewed: 919 times.
|
(Sea Angel) Port Side Grab Rail with factory window covers rolled up and held with small bungie cords.
Note WX Station between port windows and variable speed fan above Mate's seat.
Viewed: 879 times.
|
12" SS Hand Hold added for Mate.
Mounting is with 1/4" -20 x 2" welded studs with SS 1" flat washers as 'back plates' and nylon nuts.
Viewed: 506 times.
|
SS Hand Hold purchased from West Marine
Viewed: 503 times.
|
12 " SS Hand Hold is centered on port side
Viewed: 618 times.
|