Sooner or later, we'll be towing something or someone. A Wichard towing eye to R. of Dive Ladder bracket. Sailboat gear but very heavy duty.

Waste pump and valve ready to install.

Waste pump out package installed.

A half inch diameter Pit Pin to secure Delta anchor. Incidently, Delta doesn't hang up on trailer when launching..

Magna party size bbq and Magna cutting board/table.

Thru-hull for raw water wash down.

Valve for thru-hull. Green #8 wire goes to zinc for bonding.

Raw water wash down pump and filter installed in Port Lazarette hatch.

Raw water anchor and chain washdown system, made from 4" deckplate and 4" PVC drain pipe and cap. *

Not for the faint of heart! 4" hole in forward deck *

Faucet for raw water wash down installed in Port cockpit wall compartment.

Cam Cleat for line from bow.

Eye pad for forward fender, reachable from cabin window. No more trips forward for the mate.

Forward fender in position.

Changing from Vertical to Horizontal windlass presents some challenges. First, cover the old, large hole. Drill some new holes and mount a Starboard spacer. New windlass bolts through spacer and deck, 1.25" total thickness. Round cap is for wash down hose.

Amazing how happy the First Mate is over this Moen mixer faucet! Less than an hour job.Moen #87315C, possibly discontinued. New Moen model 482086 at Home Depot looks identical and should work.

Added Beckson clips for Mag-Lite. Reachable from bed or helm.

Original location of thru-hulls.

New relocated thru-hulls.

The familiar SeaLand "Traveler" toilet.

Bowl Seal Kit for Traveler toilet used in CD-25 and TC-255.

Bowl removed, new gasket in place. No sewage is seen or contacted during this procedure! New valve seen behind foot pedal.

1.25" ID PVC pipe, 3/8 of diameter is cut away on table saw. Edges rounded off to protect towels, etc.

PVC clips snap on 1.25" rails to hold towels for fresh air drying. Sort of a boater's clothes pin.