01 what lurks? is water getting into the core?
Viewed: 301 times.
|
02 so far so good (that first hole has some kind of epoxy - maybe the screw spun out and they had to fill and re-drill it at the factory)
Viewed: 194 times.
|
03 I never liked all those holes
Viewed: 195 times.
|
04 ya pretty nasty but the caulk is still there
Viewed: 203 times.
|
05 just barely
Viewed: 186 times.
|
06 at this point I\'m glad I\'m doing this preemptive upgrade
Viewed: 192 times.
|
07 removed all the old caulk
Viewed: 183 times.
|
08 broke out the modifiedd allen key core under cutter
Viewed: 202 times.
|
09 so far so good
Viewed: 198 times.
|
010 counter sunk of course
Viewed: 185 times.
|
011 cleaned up area
Viewed: 175 times.
|
012 under-cut underway
Viewed: 164 times.
|
013 all the holes are dry as a bone
Viewed: 187 times.
|
014 dry!
Viewed: 189 times.
|
015 dry!
Viewed: 185 times.
|
016 dry! they were all dry (the boat was always stored indoors and likely never used in the rain)
Viewed: 188 times.
|
017 vaccumed each hole thoroughly
Viewed: 171 times.
|
018 cleaned the insdie thoroughly
Viewed: 175 times.
|
019 masked each area
Viewed: 176 times.
|
020 injected thickened epxoy
Viewed: 199 times.
|
021 until it spilled out
Viewed: 193 times.
|
022 used the ninyl lettering knife to smooth over masked area
Viewed: 192 times.
|
023 let it set up
Viewed: 206 times.
|
024 ready for re-drilling
Viewed: 194 times.
|