01 like a lot of C-dory cruiser owners I decided to use the v-birth foam space for storage.
Viewed: 396 times.
|
02 because I have access to MDO I made hatch templates
Viewed: 240 times.
|
03 I also assumed I would not be able to reuse the cutouts for the lids
Viewed: 229 times.
|
04 I checked out a few other C-brats v-birth projects for placement
Viewed: 247 times.
|
|
06 having the lids around made this easy
Viewed: 224 times.
|
|
08 ready for a moment of truth
Viewed: 224 times.
|
09 I used a series of closely placed 1:6 in. holes to help start the cuts (a multi tool would have been much easier)
Viewed: 213 times.
|
010 I borrowed a much nicer jig saw from work than the one I own and put a brand new fine tooth blade on it
Viewed: 213 times.
|
011 the corners where sketchy trying desparately to keep both sides intact
Viewed: 230 times.
|
012 and the nightmare foam removal begins
Viewed: 239 times.
|
013 I found the drywall saw to be the best tool
Viewed: 245 times.
|
|
|
|
017 so much styrofoam!
Viewed: 225 times.
|
018 finally saw the light
Viewed: 228 times.
|
|
|
021 finally time to build
Viewed: 225 times.
|
022 I pre-assembled the underframes to make placing them easier
Viewed: 240 times.
|
023 measuring for all the holes was tedious
Viewed: 208 times.
|
|