Hole in dash where I removed old RayMarine control head and will install new Garmin control head
Viewed: 821 times.
|
Back of new control head installed in dash. (Back of Steering wheel has old auto pilot lines.)
Viewed: 665 times.
|
New control head in dash, with it\'s protective cover on.
Viewed: 685 times.
|
Garmin Smart pump installed under V-Berth
Viewed: 671 times.
|
Different view of Smart Pump
Viewed: 678 times.
|
The Smart pump is held by 4 screws thru the bulkhead. 2 at the bottom of the bulkhead just above the foot compartment door, the other two below the door.
Viewed: 656 times.
|
Smart pump now plumbed with it\'s hydraulic lines
Viewed: 674 times.
|
Back of the helm plumbing. Bottom line is return hose to Smart pump. Single vinyl hose goes to Shadow drive, and past that is tee\'d off to Smart pump and main steering hose. Tee is main steering hose and vinyl hose to Smart pump.
Viewed: 672 times.
|
View of Smart pump with all hydraulic and electric lines installed. Slack of electric lines was coiled up and set on top of pump.
Viewed: 670 times.
|
CCU was mounted at top of VBerth entry way.
Viewed: 664 times.
|
Main network T mounted in Vberth above back of helm.
Viewed: 660 times.
|
Shadow drive mounted on starboard side of helm.
Viewed: 647 times.
|
View of Network 5 way T and CCU
Viewed: 816 times.
|
Search
Private Messages
Profile
Log in
Register
Help