Rivets fastening side panel to deck have almost all corroded and fallen out, leaving open holes to the balsa core.
Viewed: 507 times.
|
More empty rivet holes with obvious core-rot. Probably have been open for years.
Viewed: 465 times.
|
|
|
The black edge-cover on the side panel was glued to the hull - a few taps on a pry-bar with a hammer broke it free.
Viewed: 432 times.
|
|
|
Rot surrounding old rivet holes
Viewed: 439 times.
|
Starting to remove all of the exposed core
Viewed: 456 times.
|
|
|
|
|
Probably 90% of what I've exposed and removed was soaked, rot ranged from severe/mush to slightly discolored but with a good bond to the fiberglass.
Viewed: 456 times.
|
|
Core balsa is 1.5 inches thick.
Viewed: 469 times.
|
|
Demo complete, heater and fan in place, balsa core cut and ready to lay in.
Viewed: 395 times.
|
1.5\" resin-coated contourable balsa from Composites One.
Viewed: 378 times.
|
Minimum order of 64sq ft. Comes in 2'x4' panels
Viewed: 388 times.
|
After laying in balsa, starting to wet-out top.
Viewed: 379 times.
|
1" #10 machine head screw with fender washer and nylock for securing rubrail.
Viewed: 401 times.
|
Re-inserting rubber part in rubrail channel.
Viewed: 466 times.
|