October 2017 131
Viewed: 766 times.
|
12 gal water tank planned for installation amidships.
Viewed: 609 times.
|
tape on each side of planned cut.
Viewed: 595 times.
|
A dremmel to start.
Viewed: 591 times.
|
Pneumatic saw to open further.
Viewed: 608 times.
|
Jigsaw with fine metal blade.
Viewed: 535 times.
|
Shopvac sucked up the dust nicely
Viewed: 573 times.
|
Jigsaw blade made a smooth cut.
Viewed: 562 times.
|
Loose blocks of Styrofoam.
Viewed: 574 times.
|
Styrofoam.
Viewed: 615 times.
|
Some mold. The keel screws were leaking. The water made the masking tape holding the styrofoam blocks to the bottom come loose.
Viewed: 554 times.
|
Used a Japanese Flush Cut saw to start the styrofoam removal.
Viewed: 563 times.
|
|
|
|
|
|
|
A small hand saw turned out to be the best tool for removing the styrofoam.
Viewed: 549 times.
|
|
Hole cut large enough for 12 gal water tank to fit in.
Viewed: 607 times.
|
Leaking keel guard screw.
Viewed: 653 times.
|
Not leaking keel guard screw.
Viewed: 644 times.
|
Fiberglassing over keel guard screws.
Viewed: 619 times.
|