October 2017 131
Viewed: 745 times.
|
12 gal water tank planned for installation amidships.
Viewed: 607 times.
|
tape on each side of planned cut.
Viewed: 587 times.
|
A dremmel to start.
Viewed: 583 times.
|
Pneumatic saw to open further.
Viewed: 605 times.
|
Jigsaw with fine metal blade.
Viewed: 530 times.
|
Shopvac sucked up the dust nicely
Viewed: 568 times.
|
Jigsaw blade made a smooth cut.
Viewed: 553 times.
|
Loose blocks of Styrofoam.
Viewed: 568 times.
|
Styrofoam.
Viewed: 612 times.
|
Some mold. The keel screws were leaking. The water made the masking tape holding the styrofoam blocks to the bottom come loose.
Viewed: 553 times.
|
Used a Japanese Flush Cut saw to start the styrofoam removal.
Viewed: 561 times.
|
|
|
|
|
|
|
A small hand saw turned out to be the best tool for removing the styrofoam.
Viewed: 548 times.
|
|
Hole cut large enough for 12 gal water tank to fit in.
Viewed: 600 times.
|
Leaking keel guard screw.
Viewed: 648 times.
|
Not leaking keel guard screw.
Viewed: 642 times.
|
Fiberglassing over keel guard screws.
Viewed: 615 times.
|