The original tank was pulled to make room for the AC unit. I used a bladder tank in a couple different locations, but it just did not work out. Moving the original tank forward took some weight off the stern and was an easy job.
Viewed: 464 times.
|
Easy fit. I extended the fill and vent tubes to use the original fill location.
Viewed: 446 times.
|
As 20 gals of water weighs 160 lbs, I used 3/4 marine ply and heavy duty aluminum angle bolted to the bulkheads.
Viewed: 479 times.
|
I never liked the sight tube level gauge as I had a hard time reading it. The panel slides up revealing the tank, an easy read.
Viewed: 469 times.
|