The C-Brats Forum Index
HomeForumsMy TopicsCalendarEvent SignupsMemberlistOur C-DorysThe Brat MapPhotos

 RELOCATE 20 GAL WATER TANK. 
The original tank was pulled to make room  for the AC unit.  I used a bladder tank in a couple different locations, but it just did not work out.  Moving the original tank forward took some weight off the stern and was an easy job.
The original tank was pulled to make room for the AC unit. I used a bladder tank in a couple different locations, but it just did not work out. Moving the original tank forward took some weight off the stern and was an easy job.
Viewed: 460 times.

Easy fit.  I extended the fill and vent tubes to use the original fill location.
Easy fit. I extended the fill and vent tubes to use the original fill location.
Viewed: 444 times.

As 20 gals of water weighs 160 lbs, I used 3/4 marine ply and heavy duty aluminum angle bolted to the bulkheads.
As 20 gals of water weighs 160 lbs, I used 3/4 marine ply and heavy duty aluminum angle bolted to the bulkheads.
Viewed: 478 times.

I never liked the sight tube level gauge as I had a hard time reading it.  The panel slides up revealing the tank, an easy read.
I never liked the sight tube level gauge as I had a hard time reading it. The panel slides up revealing the tank, an easy read.
Viewed: 466 times.

Powered by Gallery v1



Page generation time: 1711662268.08s (PHP: 100% - SQL: 0%) - SQL queries: 9 - GZIP disabled - Debug on