Installed a mount for our TV. Mount is called the "Flip" by Premier Mounts and we got it online from Beach Audio...25 bucks.
Viewed: 906 times.
|
Another view.
Viewed: 809 times.
|
Bottom view of the mount. I through bolted it with stainless machine screws. The teak curtain board provides great support. I still have to find a longer power cord for the TV so all wires will be hidden, but it works ok for now.
Viewed: 838 times.
|
Made this bracket to hold the TV in stowed position. Through bolted with stainless machine screws. Mount is very sturdy in stowed position as the top edge of the TV rests on the top edge of our teak curtain strip.
Viewed: 744 times.
|
DVD player is small and super lightweight.
Viewed: 817 times.
|
I built this bracket from 1/4" plywood and angle aluminum. It is hooked into the aux jack of our stereo system. Great sound!
Viewed: 761 times.
|
Bottom view of DVD player mount.
Viewed: 759 times.
|
Another view of DVD player. I fabbed up the bracket holding it in place.
Viewed: 718 times.
|
It works great!
Viewed: 963 times.
|
Instant hot water wth this Sunbeam Hot Shot. It boils water in 90 seconds. Great for a quick cup of tea, hot chocolate or instant coffee.
Viewed: 892 times.
|
Mini Jacker mount for kicker
Viewed: 829 times.
|
Connector rod from Cabela's works great for steering the kicker while trolling.
Viewed: 828 times.
|
Upper holes are through bolted into splashwell, others into transom with lag bolts
Viewed: 760 times.
|
Mount raises the motor about 3 inches as well as moving it aft. Lower unit clears the water while underway with kicker tilted up. Also provides extra clearance for steering cable.
Viewed: 812 times.
|
ACR Aquafix with internal GPS. Thanks go out to Matt on Napoleon!
Viewed: 863 times.
|
New insulated fish bag for those hot Florida trips.
Viewed: 846 times.
|
Mike on Gypsy inspired me to do what he did...remove the bulkhead for better access and air circulation.
Viewed: 1681 times.
|
I used a Dremel tool to cut out 2 sq. ft. of bulkhead. I trimmed everything out in oak. I built the side brace to support the shelf.
Viewed: 1369 times.
|
Still have to do a few cosmetics, but it came out pretty good.
Viewed: 1423 times.
|
Made up a new table that better suits our regular use of the boat...fishing. We can reinstall the big table in 5 minutes if we want to reconfigure.
Viewed: 987 times.
|
Another view. Lots more room.
Viewed: 899 times.
|
Celtic scroll brace keeps it sturdy.
Viewed: 836 times.
|
New transom table.
Viewed: 1007 times.
|
Huge amount of room to filet fish.
Viewed: 894 times.
|