Wallas 1300 Installation
Viewed: 1705 times.
|
(Dora~Jean) Installation Location under galley cabinet.
Viewed: 1371 times.
|
(Dora~Jean) Added another 8 AWG wire from batteries to windlass, fab'd plate to tap into line for the Wallas.
Viewed: 1315 times.
|
(Dora~Jean) Combo intake/exhaust hull lead-thru.
Viewed: 1338 times.
|
(Dora~Jean) Outside view of lead-thru.
Viewed: 1423 times.
|
(Dora~Jean) Access hole for tubing to resevoir and air return.
Viewed: 1184 times.
|
(Dora~Jean) Intake/exhaust hose and inside cabin hot air duct. Note fabbed insulating plate for intake/exhaust hose, it is spaced 1/4" on top from fiberglass.
Viewed: 1439 times.
|
(Dora~Jean) Heated air duct.
Viewed: 1434 times.
|
(Dora~Jean) Heated air output register, fixed vanes angled downward.
Viewed: 1292 times.
|
(Dora~Jean) Cold air return register, fixed vanes angled downward.
Viewed: 1265 times.
|
(Dora~Jean) Remote switch, located behind helm seat to reduce chance of accidental turn ON or OFF.
Viewed: 1309 times.
|
(Dora~Jean) Fuel resevoir, note no drooping lines between heater and resevoir, important. Bungee strap was added later.
Viewed: 1607 times.
|
Search
Private Messages
Profile
Log in
Register
Help