Wallas 1300 Installation
Viewed: 1693 times.
|
(Dora~Jean) Installation Location under galley cabinet.
Viewed: 1367 times.
|
(Dora~Jean) Added another 8 AWG wire from batteries to windlass, fab'd plate to tap into line for the Wallas.
Viewed: 1311 times.
|
(Dora~Jean) Combo intake/exhaust hull lead-thru.
Viewed: 1331 times.
|
(Dora~Jean) Outside view of lead-thru.
Viewed: 1415 times.
|
(Dora~Jean) Access hole for tubing to resevoir and air return.
Viewed: 1174 times.
|
(Dora~Jean) Intake/exhaust hose and inside cabin hot air duct. Note fabbed insulating plate for intake/exhaust hose, it is spaced 1/4" on top from fiberglass.
Viewed: 1429 times.
|
(Dora~Jean) Heated air duct.
Viewed: 1427 times.
|
(Dora~Jean) Heated air output register, fixed vanes angled downward.
Viewed: 1281 times.
|
(Dora~Jean) Cold air return register, fixed vanes angled downward.
Viewed: 1260 times.
|
(Dora~Jean) Remote switch, located behind helm seat to reduce chance of accidental turn ON or OFF.
Viewed: 1303 times.
|
(Dora~Jean) Fuel resevoir, note no drooping lines between heater and resevoir, important. Bungee strap was added later.
Viewed: 1598 times.
|