AC powered heater for tiny 19 cabin. will add one to cockpit later when canvas is ready

homemade 2x2 engine support

20140321 155158 resized

Cockpit table in cockpit position

table in fishing position

20140427 142432 resized

The steps we keep in place for easy boarding

20140427 142453 resized

Our simple sink that rotates back under the table when not in use

New smaller coolers of the same design for less weight, more footroom, and to go with our lowered ice volume needs (added boat freezer)

anchored on Liberty Bay

Battery powered lights from Costco to light up tanks and allow for easier level viewing. I can just reach the switch easy enough and only use them when level checking or fueling up. Also allowed me to see the black gunk hiding up there and cleaned that up as well.

15amp power connection for chargers/shore power. Just visible, is one end of the GFI strip. A switch, bus bars, charger, 12v outlet, and combiner also hide in stbd side laz storage along with shore power cord and some spares.

new hatches ordered to replace leaky factory hatches

Very close in size and fit the same hole without any cutting

No sealant was used on either hatch which explains even further why these leaked so bad. All that brown is just dirt

I will mount them with this rope caulking first and see how that works before possibly going for a full goop-up. A little leaking is tolerable but only a little.

New hatch in place

Stbd wiring cleaned up

Port side was easier. Used white split loom, adhesive mounts, and wire ties. Simple stuff

New charger and combiner mounted on new hatch (casually)making the most of space on our little boat

All new Plumbing!

Strap (one loop forming handle on each side) added for ease of moving from Berth to cockpit overnight

The extra extinguisher I always wished for is now
mounted to the bulkhead corner next to where my head sits all night