Port side cutout. You can see foam does not fill complete void
Viewed: 1642 times.
|
Starboard side cutout. Just like other side, foam does not completely fill void.
Viewed: 1294 times.
|
I\'ll probably reuse the carefully cut out piece to cover the compartment instead of a hatch.
Viewed: 1346 times.
|
Here you can see the fiberglass material and core up close from the cutouts in the V-berth.
Viewed: 1316 times.
|
This photo shows the amount of foam that was in the bow.
Viewed: 1237 times.
|
This photo also shows the amount of foam that was in the bow.
Viewed: 1228 times.
|
Port side aft after removal of foam. Core appears to stop just in front of helm bulkhead.
Viewed: 1285 times.
|
Port bow. I\'ll leave foam here, and even added a bit more. This is just behind front edge of berth bunk.
Viewed: 1242 times.
|
Looking forward on Starboard side. Removed all foam up to Bow center.
Viewed: 1283 times.
|
Looking into starboard side after foam removed. See core board seems to end just in front of helm bulkhead.
Viewed: 1343 times.
|
Finished storage cover in position
Viewed: 1480 times.
|