Transducer block (before wire properly routed or secured). This is a 3/4" Starboard™ block. I over-drilled and removed a very generous amount of transom core, then painted with neat epoxy and then filled holes with thickened epoxy. After that cured, I drilled and tapped (into the thickened epoxy areas) for the bronze machine screws that secure the block to the transom. The bedding is an experiment with butyl (later I removed it and it was holding very tenaciously, but I have not tested it long-term yet).
After mounting the block, I tapped the Starboard for the transducer fasteners.
Viewed: 499 times.
|
stove removed
Viewed: 466 times.
|
|
|
|
|
Wallas open and control
Viewed: 331 times.
|
|
|
NL map
Viewed: 401 times.
|
Utah fishing license page
Viewed: 373 times.
|
AZ license
Viewed: 362 times.
|
|
|
stbd bow at dock
Viewed: 362 times.
|
Yellow 16 spunky
Viewed: 376 times.
|
Glimpse of "mockup" splashwell table I made, inspired by the ones on Halcyon, C-Cakes, and Kerri-On.
Viewed: 364 times.
|
Glimpse of "mockup" splashwell table I made, inspired by the ones on Halcyon, C-Cakes, and Kerri-On.
Viewed: 363 times.
|
Splashwell table on Halcyon. I modeled mine after this one, with one main difference, which is that mine just rests on the small lips inboard of each lazarette lid vs. covering the lids as this one does. So I have a bit less table width, but can get in and out of the lazarettes with it in place.
Viewed: 431 times.
|
C-Doré PT
Viewed: 387 times.
|
Lighter blue C-Dory 25 from Sportcraft Marina's website.
Viewed: 379 times.
|
1993 C-Dory center console (console, etc. added recently)
Viewed: 344 times.
|
1993 C-Dory center console (console, etc. added recently)
Viewed: 252 times.
|
1993 C-Dory center console (console, etc. added recently)
Viewed: 255 times.
|