Step One remove the pin.
Viewed: 458 times.
|
The tool you need to remove the end.
Viewed: 489 times.
|
Step Two, unscrew the end.
Viewed: 466 times.
|
Step Three, remove the end and the spring.
Viewed: 440 times.
|
Step Three, continued.
Viewed: 434 times.
|
Step Four, pull out the actuator and remove the top seal. Replace with a U-seal 0.75" x 1.25" x 0.25" 800 PSI. The O-ring was in good shape and did not need replacing.
Viewed: 480 times.
|
Step Five, reassemble in reverse order of disassembly.
Viewed: 434 times.
|
Port Trim Tab repaired and no longer leaks. Total cost of U-seal $5.35, having a trim tab that no longer leaks, priceless!
Viewed: 461 times.
|
Search
Private Messages
Profile
Log in
Register
Help