The C-Brats Forum Index
HomeForumsMy TopicsCalendarEvent SignupsMemberlistOur C-DorysThe Brat MapPhotos

 Nomad Mods 
Can use on the port or stbd side.
Can use on the port or stbd side.
Viewed: 903 times.

Swings inboard.  You then hook up the BBQ and gas cylinder.  If you drop anything, it stays in the boat.
Swings inboard. You then hook up the BBQ and gas cylinder. If you drop anything, it stays in the boat.
Viewed: 812 times.

Swings outboard.
Swings outboard.
Viewed: 798 times.

BBQ mounted inboard.  Underneath the BBQ there is a Scotty male part that slots into the Scotty female part.
BBQ mounted inboard. Underneath the BBQ there is a Scotty male part that slots into the Scotty female part. *
Viewed: 954 times.

Swings out ready to BBQ.  Any grease or drips are well over the side, not on the boat.
Swings out ready to BBQ. Any grease or drips are well over the side, not on the boat.
Viewed: 927 times.

15lb Manson Supreme showing clearance.
15lb Manson Supreme showing clearance.
Viewed: 876 times.

Good enough for Sam on
Good enough for Sam on "Retriever", good enough for me.
Viewed: 857 times.

Fits perfectly through the bale.
Fits perfectly through the bale.
Viewed: 879 times.

New fuel/water separator with water drain off bowl.
New fuel/water separator with water drain off bowl.
Viewed: 875 times.

Not enough room in the Stbd lazerette, so moved it into the splashwell.
Not enough room in the Stbd lazerette, so moved it into the splashwell.
Viewed: 859 times.

Clam shell on, job finished.
Clam shell on, job finished.
Viewed: 877 times.

Hatch covers to keep the rain out.  Leak problem solved.
Hatch covers to keep the rain out. Leak problem solved.
Viewed: 996 times.

Used a vinyl/rubber type backing to improve the water repellant qualities.
Used a vinyl/rubber type backing to improve the water repellant qualities.
Viewed: 894 times.

Got this idea from Chimo at the 2013 Sidney gathering.
Got this idea from Chimo at the 2013 Sidney gathering.
Viewed: 1278 times.

Cost of materials for two hatch covers was less than $8.
Cost of materials for two hatch covers was less than $8.
Viewed: 1225 times.

* Comments available for this item.
Powered by Gallery v1



Page generation time: 1715051240.8s (PHP: 100% - SQL: 0%) - SQL queries: 9 - GZIP disabled - Debug on