Refer removed, floor waiting to be cut out.
Viewed: 937 times.
|
First small cut to check for clearance in hull.
Viewed: 788 times.
|
Hole enlarged.
Viewed: 783 times.
|
Mock up of tank dropped into place to verify fit.
Viewed: 834 times.
|
Cardboard mock up of tank in place.
Viewed: 853 times.
|
Test block to get floor angles right.
25 deg. port, 21 deg. Stbd.
Viewed: 809 times.
|
Shelf secured to hull.
Viewed: 776 times.
|
Shelf for new tank in place and drying.
Viewed: 772 times.
|
Replacement floor test fit in Refrigerator compartment.
Viewed: 785 times.
|
Existing holes in bulkhead used to route new water line and 12v wiring.
Viewed: 815 times.
|
Limber hole installed in bulkhead.
Viewed: 754 times.
|
Tank set in place, it fits!
Viewed: 767 times.
|
Vent and filler hoses in place.
Viewed: 763 times.
|
New fill pipe and vent below Port window.
Viewed: 775 times.
|
One way valve and Tee plumbed into original plumbing jumble on Stbd side.
Viewed: 858 times.
|
Tank and pump secured. Straight fitting used instead of 90 to relocate filler tube and deck plate.
Viewed: 962 times.
|