Anchor retainer using quick release pin to allow removal of anchor line from bow roller. Neoprene pad prevents scratches.

Close up of holes drilled in bow roller and anchor shank

Forespar Mini Galley gimballed propane stove with kettle mounted next to helm; provides heat in a pinch *

Stove mount with locking storage drawer to the left.

Locking storage drawer with angled front and compartments for GPS/binos/VHF, dividers/pens, other valuables.

Trailer lights mounted on cedar board for improved reliability. *

Trailer lights secured above splashwell with bungees; wiring routed through camperback and along port side to bow.

Case Logic seat back caddy under $20. Installed one on each seat.

Overhead hatch added to cabin-- outside view. Bowmar 900 series 16" model. Camperback is shown behind hatch.

Overhead hatch with screen-- storage shelf forward. Red LED strip (less harsh for night use) installed to interior light circuit and OEM interior light moved forward (uses switch on light casing).

View upwards with hatch open-- hinges on aft side.

Vent visor installed on sliding windows-- cut down from generic car visor (a Bronco model, I think). $40 for a pair.

Bow eye installed to provide attachment point for bitter end of anchor line.

Bed extension (1/2 inch birch ply) resting on oak 1x2 on seat boxes; piano hinge allows unit to fold for storage.

Cushion in place on berth extension. Very comfy! Width is approx 39" (single bed size) across extended section. Length about 7 feet.

Instrument console: Ritchie Explorer compass, Garmin 545s GPS sounder, tach/ hour, tilt meter, horn button, intermittent wiper button, various electrical switches, 12 volt outlet facing downward under switch panel.

Installation for Standard Horizon HX471 handheld VHF with DSC. Cradle keeps radio close to my ear, connects to GPS for positioning and can be plugged in for charging at any time.

PLB mounted under helm station.

Stainless grab handle installed in well to assist boarding when standing on permatrim

Foam cut back to provide bin storage under dash. Teak handle angled and glued to assist entry & exit from berth