(Sea Angel) ST6001 Autopilot hydraulic pump located under the sink. There is minimal noise heard from this location.
Viewed: 748 times.
|
(Sea Angel)
ST6001 Autopilot CPU and hydraulic pump
located under sink. Fluxgate gyro-compass is on other side of refrigerator cabinet in floor compartment mounted on the forward bulkhead at the bilge level.
Viewed: 755 times.
|
(Sea Angel) S1G, Autopilot CPU [SmartPilot]located under the sink.
The black box to the right is the GARMIN "GSD-20" transducer module.
The hydraulic pump for the autopilot can be seen at the bottom right of the pix.
Viewed: 689 times.
|
Sea Angel's SmartPilot wiring. Notice all the terminals are color coded with the appropriate cables; except, the BiDirectional Hydrolic Pump. Its terminal is labeled "A" & "B". Beware of the leads position if you should have to remove them. This hookup has the Red wire to the "A" Terminal.
Viewed: 353 times.
|