Shelves 006

Shelves 008

Boat Mods - Windlass Switch 01 New solenoid (top), and rocker switch (right); view of back of helm.

Boat Mods - Windlass Switch 02 New solenoid

Boat Mods - Windlass Switch 03 Back view of new rocker switch

Boat Mods - Windlass Switch 04 Re-wired circuit breaker

Boat Mods - Windlass Switch 05 New Solenoid

Boat Mods - Windlass Switch 06 New Solenoid

Boat Mods - Windlass Switch 07 New rocker switch at helm (far right).

Boat Mods - Windlass Switch 08 New rocker switch.

Boat Mods - Windlass Switch 09 New plug-in for remote switch on starboard side of v-berth.

Boat Mods - Windlass Switch 10 New plug-in for remote switch on starboard side of V-berth.

Boat Mods - Windlass Switch 11 New plug-in for remote switch with remote cord attached.

Boat Mods - Windlass Switch 12 New plug-in for remote switch with attached cord exiting through hatch.

Boat Mods - Windlass Switch 13 Remote switch on deck.

Boat Mods - New Hdng Sensor & Sounder Wiring: Separate fuse block that is for nothing but electronics and is wired through a switch on the helm panel.

Boat Mods - Transducer Mount DSC06078: Sliding Mount with transducer in the down position. Purchased from transducersaverplus.com

Boat Mods - Transducer Mount DSC06079: Sliding Mount with transducer in the up position.

V-Berth Storage Install -DSC06134

V-Berth Storage Install -DSC06135 A lot of foam to deal with, but the good news is it was dry all the way to the bottom.

V-Berth Storage Install -DSC06137 Hatch in place. I split the sleeping mattress and Hypervent pad longitudinally to make getting at the opening easier. It works well.

V-Berth Storage Install -DSC06187 Two storage boxes to be put in the new space.

V-Berth Storage Install -DSC06190 Closed cell foam and a little wood divider to keep things in place. The gray bags on either side hold spare props.

V-Berth Storage Install -DSC06191 The spare anchor slides all the way forward.