drilled a hole in deck of pearson 30 balsa core--undercut with dremel sander

Dremel sander under cutting balsa

undercut and edges of hole filled with epoxy filler

oversized hole drilled in deck

Dremel bit to under cut

Dremel bit under cutting hole

filling hole with thin piece of popcicle stick

filler smoothed with surface of the deck, ready for screw, without intrusion into core.

five foot piece of 3/4\" hose to fit into macerator and sink discharge

Hose fitted into the macerator discharge

3/4\" hose fit into the sink drain of Tom Cat

pressure container to flush motor with concentrated \"Salt away\"

5/8\" hose clamped over water pump output tube for flush of \"salt away\"

4 year old water pump impeller, wear plate and bottom plate

$ 89, 5,000 BTU AC unit in the opening window of CD 25. Sunbrella snaped on the inside of the frame and draped over the sides to keep water out.

Railing on foreward cabin house CD 25 *

Railing by the cockpit on cabin house

Inside of cabin with 5,000 BTU air conditioner and sunbrella snapped in place. The fan fold \"wings\" from the airconditioner are snapped to the window frame, and the air conditioner is resting on pipe insullation foam, and pipe insullation foam to seal the top and sides of the opening.

Garhauer davit on C D 25

2 AGM batteries in back of water heater on ends

Aluminum boat davit at house

CD 25 King Starboard with two transducers

Tire wear left front

Tire wear left rear