A 28' Something or Other and a 22'C-Dory Cruiser. And the winner is Swee Pea!
Viewed: 968 times.
|
The First Mate Takes Us Home.
Viewed: 1463 times.
|
Thanks to all the Brats that bought cabin sliding windows; could have not been able to afford one without you all
Viewed: 1134 times.
|
Window shades that I made using Sunbrella and a Singer sewing machine
Viewed: 1150 times.
|
Window Shade on cabin door
Viewed: 1011 times.
|
Honeywell Weather Station
Viewed: 1138 times.
|
Sending Unit of Honeywell Weather Station
Viewed: 1305 times.
|
Shelf under sink. 7 1/2" oak with a 2" oak fiddle to keep stuff from sliding off. Sits behind storage bin baskets, removed for photo.
Viewed: 955 times.
|
You can see wood glued to hull with 5200 quick set. Then "L" brackets installed to hold shelf. Very secure.
Viewed: 889 times.
|
This view you can see shelf. Adds storage to an otherwise useless space.
Viewed: 906 times.
|
Installed a new cable boot. Let's see how long this will last.
Viewed: 899 times.
|
About to install a kicker mount. We are using a 15" shaft 6 HP Nissan motor whose primary role is on our inflatable. Emergency use on the 22 only.
Viewed: 875 times.
|
Just where to drill thoses holes?
Viewed: 832 times.
|
My buddy Charlie, a professional boat mechanic. We need to make sure that there is clearance between the main and the kicker.
Viewed: 863 times.
|
We are using a Fulton mount, but I want to use a mounting plate to mount the kicker mount. The mount and motor slides into this low profile mount. Make sense?
Viewed: 908 times.
|
Must clear the trim tab. Must not interfere witht the main. Must tilt up. This position is a little far to the starboard side, but with the kicker raised, will work.
Viewed: 889 times.
|
|
Yes, it was necessary to move the gas tank forward before drilling. Careful, careful, careful.
Viewed: 799 times.
|
The Fulton motor mount slides into the mount bracket. When not in use, we can remove the motor mount all together and keep the uncluttered look.
Viewed: 1053 times.
|
The Fulton mount will lower the kicker 14 1/2 inches, placing the prop at the proper height.
Viewed: 895 times.
|
Had to slightly reroute the trim tab line.
Viewed: 923 times.
|
I plan to attach a rod from the main to the kicker. This way I can steer from the helm. I have pretty good access to the kicker from the cockpit.
Viewed: 1047 times.
|
Kicker full up, tilted in its second position. It can be tilted full up, but its close. Needed the room between the main because a sharp turn would have the main striking the tiller handle on the kicker.
Viewed: 932 times.
|
I'm satisfied.
Viewed: 940 times.
|