Here's what we're replacing: 2 ea golph cart batteries, 70 lbs. ea
Viewed: 208 times.
|
Control panel, showing the 2 control switches, 1/2 rate charging of ~8 amps and Li battery voltage
Viewed: 176 times.
|
DC-DC charger, installed upside down. Showing the 2 ea. control wires. 1 for charging and 1 for 1/2 rate
Viewed: 176 times.
|
Close up of the battery. Size 31. Contains internal BMS. Notice all the wires going to the pos terminal. Tried to reduce them but no luck.
Viewed: 202 times.
|
Close up of Balmar battery monitor (fore) and positive tie terminal (aft. Alternator feeds the terminal
Viewed: 174 times.
|
Close up of battery switch and negative bus. Finally labeled wires. Took a day.
Viewed: 177 times.
|
Overall shot of installation. A lot of wires.
Viewed: 175 times.
|
Starting battery, flooded lead acid, FLA. Serves a buffer between primary battery charger and dc-dc converter. Also as alternator sink when outboard is running. Starts engine.
Viewed: 179 times.
|
Bill of Materials
Viewed: 129 times.
|
Battery Installation
Viewed: 132 times.
|
Battery Wiring
Viewed: 135 times.
|
Bill of Materials
Viewed: 121 times.
|
Battery Installation
Viewed: 116 times.
|
Battery Functional
Viewed: 157 times.
|
Search
Private Messages
Profile
Log in
Register
Help