July 2002, Picked up new C-Dory @ Northwest Outlet, Superior, Wi., and trailer home to Va.
Viewed: 2131 times.
|
March 2003 Here's the new Johnson 4stroke in it's steel rack after I striped the cardboard away.
Viewed: 1392 times.
|
After taking the weight of the motor with the lift, I unbolted the steel cage away, ready to wheel over to the boat.
Viewed: 1466 times.
|
On this warm March day, with my wife and son helping me, let's hang it!
Viewed: 1248 times.
|
Glad to have the wife here, she is a perfectionist, and won't let me hurry along. Let's see, first thing we need to do is level every thing up.
Viewed: 1335 times.
|
Late in the after noon, we have it bolted up right where we wanted it, with the ventilation plate 1/8" below the bottom of the boat. Thanks family for helping me do a job well done.
Viewed: 1307 times.
|
Here's another look.
Viewed: 1283 times.
|
By May, we have Greeniron ready for sea trials. Only problem was motor would not run much above idle. Bypassed fuel selector valve, ran good. Later, took valve apart, what a mess, all gooped up with sealer, and plumed wrong.
Viewed: 1437 times.
|
Here's the crew, the boy is begging food from Mama, there's a little black beagle running around here somewhere too. At Buggs Isl. Lake, Va.-NC. Water temp. 87*
Viewed: 1772 times.
|
103-0372_IMG_2
remote eastern shore Chesapeake Bay.
Viewed: 1425 times.
|
Lake Powell the magnificent
Viewed: 1219 times.
|
Powell
Viewed: 1177 times.
|
Thumpers tonight Lake Powell August 007
Viewed: 1348 times.
|
25\' Cruise Ship
Viewed: 699 times.
|
25\' Cruise Ship. Notice it is shown with a inboard-out board for power.
Viewed: 738 times.
|
Friday Harbor, Dog friendly town.
Viewed: 787 times.
|
Change cam drive belt on 2002, 70hp Johnson. Service manual said do @ 200 hours. Now it's been extended to 800 hours.
Viewed: 785 times.
|
Using special OMC tools, remove flywheel bolt.
Viewed: 772 times.
|
OMC tools, pop flywheel off tapered shaft.
Viewed: 793 times.
|
Remove alternator, and belt tension pulley.
Viewed: 786 times.
|
With timing marks properly aligned, remove belt, install new one, and reassemble.
Flywheel installs with notch on keyway on tapered shaft. Belt tension pulley has spring loading for belt tension, over tension can damage oil pump drive at bottom of cam shaft.
Viewed: 1070 times.
|