this tool made from 1/4 aluminum worked great for removing coring from deck penetrations
Viewed: 350 times.
|
rotten transom, and the mystery of the patch is revealed. this boat took a hit in a previous life- foam coring in the corner
Viewed: 362 times.
|
the inside of the 'repair'. I cannot tell from the outside, they did good finish work
Viewed: 332 times.
|
cut out the dam and drilled a few more holes to help the sump dry out. this sump is not cored underneath, solid glass (I think)
Viewed: 336 times.
|
this is the extent of the core removal under the galley. you can see the void from layup- its the lighter area
Viewed: 508 times.
|
holes to dry the sole
Viewed: 301 times.
|
door hinges are loose and the core is a little wet
Viewed: 289 times.
|
inside the $100 wedding tent
Viewed: 334 times.
|
heater going inside and warming it up
Viewed: 427 times.
|
getting ready to lay the balsa
Viewed: 288 times.
|
ground and cleaned with acetone
Viewed: 313 times.
|
two layers of 3/4 balsa
Viewed: 314 times.
|
first layer
Viewed: 277 times.
|
second layer in and weighted down, boat hook keeps the blocks from sliding downhill
Viewed: 280 times.
|
after peeling off the plastic
Viewed: 362 times.
|
making a panel
Viewed: 259 times.
|
making a panel
Viewed: 248 times.
|
panel is made and trimmed
Viewed: 250 times.
|
grinder was too aggressive, should have used a sander
Viewed: 325 times.
|
cabin floor ground down
Viewed: 292 times.
|
sump ground out
Viewed: 268 times.
|
cockpit side of sump under step in door
Viewed: 265 times.
|
template for sealing off the sump from the cockpit
Viewed: 264 times.
|
set in place, need to grind a little still
Viewed: 289 times.
|