(B~C) more insulation

(B~C) just like the inside of an Igloo cooler *

Table leg "keeper"

Rounded table corners

(Dora~Jean) Wallas 1300 Installation.

(Dora~Jean) Installation Location under galley cabinet.

(Dora~Jean) Added 8 AWG wiring fab'd plate to tap into line.

(Dora~Jean) Combo intake/exhaust hull lead-thru.

(Dora~Jean) Outside view of combo intake/exhaust lead-thru.

(Dora~Jean) Access hole for tubing to resevoir and air return.

(Dora~Jean) Intake/exhaust hose and inside cabin hot air duct.

(Dora~Jean) Heated air duct.

(Dora~Jean) Heated air output register, fixed vanes angled downward.

(Dora~Jean) Cold air return register, fixed vanes angled downward.

(Dora~Jean) Remote switch, located behind helm seat to reduce chance of accidental turn ON or OFF.

(Dora~Jean) Fuel reservoir, note no drooping lines between heater and reservoir, important. Bungee strap was added later.

galley remodel cruise mode

galley remodel cook mode

(Minnie Swann)Using existing window frame screws for mounting speakers and fire Ex.

(Minnie Swann) Storage position for pin to hold peskey window open

(Minnie Swann) Pin in place, more holes can be added for various positions

(Minnie Swann) I modified ladder by cutting off bottom rung and using leftover tubing to make standoff extensions. Can be used for boarding from dock or water on either side of gunnel

(MinnieSwann) Microwave placement

(Minnie Swann) Air lines for horns and Aux. VHF speaker helps with bad hearing and motor noise.