This is the 23 Venture Hull being laid up in our lamination shop.
Viewed: 1073 times.
|
Form Core is used to strengthen and solidify the hull.
Viewed: 443 times.
|
This is the deck mold for the 23 Venture after it has been all laid up.
Viewed: 424 times.
|
Look at the Stern--all laid up!
Viewed: 423 times.
|
View from the Stern Forward!
Viewed: 404 times.
|
This is the 23 hull after all of the fiberglass has been ground down so that gel coat can be applied and small parts can be assembled.
Viewed: 473 times.
|
Bow to Stern Look
Viewed: 410 times.
|
|
Bow to Stern look at the boat with aft liner glassed in. This will be make the floor of the boat flat.
Viewed: 423 times.
|
Aft insert to raise the floor.
Viewed: 453 times.
|
When the two parts are glassed together they are reassembled as one piece in the hull and deck molds together.
Viewed: 427 times.
|
Married together!
Viewed: 460 times.
|
Molded interior bow liner installed prior to the boat being married together.
Viewed: 468 times.
|
View from the bow to Stern from the inside.
Viewed: 430 times.
|
Small Parts inserted into hull that will make up cockpit storage.
Viewed: 456 times.
|
More interior parts in hull!
Viewed: 463 times.
|
View Through the Bulkhead
Viewed: 386 times.
|
Bulkhead out of the mold
Viewed: 387 times.
|
Aft--With Gunnel
Viewed: 404 times.
|
23 Venture Springs to new Life! Out of the Mold
Viewed: 417 times.
|
Profile of the Venture out of the Mold
Viewed: 393 times.
|
Non-Skid on Deck--Robert's Gray
Viewed: 381 times.
|
Transom
Viewed: 381 times.
|
Aft Forward View
Viewed: 460 times.
|
Search
Private Messages
Profile
Log in
Register
Help
