Here's what we're replacing: 2 ea golph cart batteries, 70 lbs. ea
Viewed: 212 times.
|
Control panel, showing the 2 control switches, 1/2 rate charging of ~8 amps and Li battery voltage
Viewed: 181 times.
|
DC-DC charger, installed upside down. Showing the 2 ea. control wires. 1 for charging and 1 for 1/2 rate
Viewed: 181 times.
|
Close up of the battery. Size 31. Contains internal BMS. Notice all the wires going to the pos terminal. Tried to reduce them but no luck.
Viewed: 207 times.
|
Close up of Balmar battery monitor (fore) and positive tie terminal (aft. Alternator feeds the terminal
Viewed: 179 times.
|
Close up of battery switch and negative bus. Finally labeled wires. Took a day.
Viewed: 183 times.
|
Overall shot of installation. A lot of wires.
Viewed: 181 times.
|
Starting battery, flooded lead acid, FLA. Serves a buffer between primary battery charger and dc-dc converter. Also as alternator sink when outboard is running. Starts engine.
Viewed: 184 times.
|
Bill of Materials
Viewed: 134 times.
|
Battery Installation
Viewed: 137 times.
|
Battery Wiring
Viewed: 141 times.
|
Bill of Materials
Viewed: 127 times.
|
Battery Installation
Viewed: 122 times.
|
Battery Functional
Viewed: 163 times.
|