(AnchortownJim) Another view of the solenoid mounting

(AnchortownJim) Flowscan Accutrol fuel flow meter

(AnchortownJim) Flowscan sending unit, mounted under the starboard lazerette above the fuel tank

GPS mounting on shelf and compass mounting.

(AnchortownJim) View from the captain's seat

(AnchortownJim) Baystar hydraulic steering replaced the cable system

Shore power connection under port gunnel

Shore power cabling inside

Shore power cabling, AC panel and GFI outlet mounting locations inside port aft seat box

Blue Seas Systems AC panel mounted in port aft seat box. It has a digital mulitmeter built in

GFI outlet mounted on front of the port aft seat

True Charge 10 Amp battery charger mounted under galley on front bulkhead on the left, Blue Sea Systems CL-Series BatteryLink a battery combiner on the right

Aft bilge pump mounting

Aft bilge line and through hull fitting on port side

New stern railing with rod holder brackets and new fish cleaning table of my own design *

Level floor in galley cabinet. Made out of 1/2" ply and screwed to cleats for easy removal.

Light mount over dinette table, a much needed addition. Mounting ring made out of King Starboard. Ring is easily replaced if new light fixture is required.

Light mounting ring screwed to overhead through the fiberglass as there was not a core to put screws into.

Completed overhead light. Has two brightness levels. Highest is good enough to conduct surgeries under! It is very bright.