Rocna 6kg fisherman anchor. SeaDog pivoting bow roller.
Viewed: 364 times.
|
EZ Anchor Patriot 2. This is the best upgrade I have made. Push of a button deploy and retrieve. No more wet rope in the cuddly.
Viewed: 275 times.
|
Another view. Loaded with 30ft 1/4 chain, 150ft 3/8 nylon, 150 ft 5/16” Dyneema.
Viewed: 303 times.
|
Rode was jumping off the side of the factory Sea Dog Roller. I modified it by welding the EZ Anchor supplied roller to the rear. Works great!
Viewed: 282 times.
|
E-Z Anchor Patriot 2 Drum Anchor winch
Viewed: 273 times.
|
My boat is moored 6 month or more of the year. I wanted the outboard completely out of the water when docked to eliminate corrosion / Sea Growth. The motor is mounted with a 4” setback manual jackplate.
Viewed: 299 times.
|
Garelick Heavy Duty outboard bracket. 9.9 kicker, remote controlled.
Viewed: 318 times.
|
I do a lot of trolling for Salmon, I needed steering and throttle on the deck. I built the helm mount by modifying one I had on hand from a Livingston. Steering is a Baystar system, Mercury Shift Throttle control. I love the set up. 10” Garmin plotter / Sonar not show.
Viewed: 289 times.
|
Remote mounted Mercury 9.9 in action
Viewed: 299 times.
|
Door is finished with window and lock installed. Steering console ready for baystar system.
Viewed: 313 times.
|
Door is toast. I will be building a new fiberglass one. (Pictured is the bottom of the door).
Viewed: 282 times.
|
The beginning of my new fiberglass door. Very simple MDF mold. Modeling clay radiuses in corners, Duratec surfacing primer sprayed. Followed by Lite polishing, 4 coats of wax release, 2 coats of PVA.
Viewed: 273 times.
|
Once the mold was prepped, I brushed on a Couple heavy coats of Gelcoat. 3 layers of Mat, HoneyComb core, three more layers of mat, Gelcoat. I laminated block of hardwood where hinges, door handle are mounted
Viewed: 257 times.
|
Door is installed for test fit. I was pretty happy with how it turned out, not perfect but better than the old one. The green coating is the PVA, it washes off with water. Window was installed using the old door as a pattern.
Viewed: 319 times.
|
Door, just out of the mold.
Viewed: 284 times.
|
Installed the blue sea add a battery system. The switch is run in the on position, both batteries are charged when charging voltage is available. During discharge they are separated so your starting battery will not be drained.
Viewed: 262 times.
|
It was a tight fit but happy with the result. This is the starboard rear transom hatch. I build a fiberglass bracket to install the Blue Sea battery combiner and on off switch
Viewed: 285 times.
|
IMG 20230630 194028145 HDR Original
Viewed: 254 times.
|
My second mate.
Viewed: 285 times.
|
Photo from the Reid harbor dock.
Viewed: 290 times.
|
On the hook.. Patos Island, Wa state
Viewed: 269 times.
|
image Original
Viewed: 312 times.
|
I glassed both sides of 3/4” piece of plywood core to fill hole. Once faired it was finished with a krylon paint job. High build primer filled by antique white top coat. Close enough.
Viewed: 294 times.
|
IMG 20230806 140535113 HDR Original
Viewed: 305 times.
|